Lumiscope 1146 User Manual

34
36
35
33
Specifications
10 ~ 40 C (50 ~ 104 F)
15 ~ 90%RH (Noncondensing)
-20 ~ 60 C (-4 ~ 140 F)
10 ~ 95% RH (Noncondensing)
Temperature
Humidity
Temperature
Humidity
Barometric Pressure
Memory 180 (2*90) Sets of Measurement Values
Automatic by Internal Pump
Automatic by Air Valve
In 2 Minutes
Approx. 170g (Batteries not included)
Operating
Environment
Storage
Environment
Memory Function
Inflation
Power Source
Rapid Air Release
Automatic Power-Off
Gross Weight
80~105 kPa
2 AAA Alkaline Batteries
Specifications
Specifications
The unit satisfies the requirements of IEC60601-1 Medical electrical equipment,
EN1060-1: Non-invasive sphygmomanometer, EN1060-3: Non-invasive
sphygmomanometer,IEC80601-2-30: Medical electrical equipment.
The unit satisfies the requirements of EN60601-1: Medical electrical equipment
Part 1: General requirements for basic safety and essential performance;
EN60601-1-2: Medical electrical equipment Part 1-2: General requirements for
basic safety and essential performance – Collateral standard: Electromagnetic
compatibility – Requirements and tests; EN1060-1:Non-invasive
sphygmomanometers – Part 1: General requirements; EN1060-3: Non-invasive
sphygmomanometers – Part 3: Supplementary requirements for
electro-mechanical blood pressure measuring system. EN1060-4: Non-invasive
sphygmomanometers – Part 4: Test procedures to determine the overall
system accuracy of automated non-invasive sphygmomanometers.
The unit has passed the EMC Test.
Blood pressure measurements determined with this device are equivalent to
those obtained by a trained observer using the cuff/stethoscope auscultatory
method, within the limits prescribed by the American National Standard,
Manual, electronic, or automated sphygmomanometers.
The risk of patient and user can be lowered to an acceptable level.
Specifications are subject to change without notice due to improvements in
performance.
Applied parts include cuff.
The device, accessories, and packaging must be disposed of correctly at the
end of their usage. Please follow Local Ordinances and Regulations for
disposal.
Protection Class: Internally powered equipment
Applied Part Type: Type B
Moisture Protection: IPX0, continue operation
Specifications
Lumiscope 1146
LCD Digital Display
Oscillometric Method
Measurable
Model No.
Display
Measuring Principle
Circumference of Wrist
13.5~21.5cm
(5.3''~8.5'')
Electric Shock
Protection
Measurement
Range
Accuracy
Pressure
Pulse
Pressure
Pulse
Pressure
0 to 299 mmHg (0~39.9 kPa)
40 to180 Pulses/min
3 Digits Display of mmHg or kPa
3 Digits Display
Memory/IHB/Heartbeat/Low Battery,etc.
3 mmHg (0.4kPa)
5% of reading
Pulse
Internal power supply appliance type B
LCD
Indication
Symbol
Backlight
White

Lumiscope 1146 Specifications

General

Brand	Lumiscope
Model	1146
Category	Blood Pressure Monitor
Language	English