Need help?Do you have a question about the Luna BCS 315 and is the answer not in the manual?
Covers general warning symbols and their specific meanings for safe operation.
Details specific warning symbols related to rotating objects, electricity, and cutting tools.
Mandatory signs for wearing protective equipment like glasses, ear protection, and gloves.
Mandatory signs for reading manuals, using correct tools, and general safety procedures.
Prohibits wearing jewelry and gloves for certain operations to ensure safety.
Advises against operating the machine with wet hands to prevent electrical hazards.
Essential safety measures for using electric tools to reduce risks of shock, injury, and fire.
Critical warning about the risk of injury from reaching into the running saw blade.
Instructions for setting up the saw, including attaching legs and rubber feet.
Guidance on using the chassis for transporting the saw and its proper retraction.
Steps for mounting and dismounting the saw blade guard for safety.
Procedure for setting the saw blade splitter for maximum cutting depth.
Instructions on how to safely remove and replace the saw blade.
How to operate the ON/OFF switch and adjust the cutting depth.
Using the parallel stop for longitudinal cuts and setting its height.
Using the cross stop with the sliding table for angled cuts.
Procedure for adjusting the saw blade to different cutting angles.
Detailed steps for performing longitudinal (slitting) cuts on workpieces.
Using push sticks for narrow cuts and making angled bevel cuts.
Steps for performing cross cuts using the sliding table and cross stop.
Guidelines for regular cleaning of the machine using appropriate methods.
Details required when ordering replacement parts for the machine.
To Next Page
General
