What to do if my Luna JMS 260 has no operation?
If the Luna Saw is not working, the issue might be with the plug fuse. In this case, replace the fuse. Alternatively, the brushes may be worn, requiring replacement by an authorized service center. In case of a power tool fault, it's best to contact an authorized service center.
Why is my Luna JMS 260 vibrating excessively in use?
If your Luna Saw is vibrating excessively, it could be due to a distorted, bent, or damaged saw blade. Replace the saw blade immediately. Another cause might be incorrect mounting of the saw blade, so refit it exactly as per the instructions in this manual. For a machine fault, contact an authorized service center.
Why is the cutting performance of my Luna Saw poor?
If the cutting performance of your Luna Saw is poor, it could be due to worn or damaged teeth. Replace the saw blade. Also, check if you are using the incorrect saw blade type and replace it with the correct type for the material you're sawing. Ensure the saw blade meets the required specifications and that the saw blade is correctly fitted as per the manual's instructions.
Why is the mitre or bevel angle difficult to adjust on my Luna JMS 260 Saw?
If the mitre or bevel angle on your Luna Saw is difficult to adjust, it's likely due to a build-up of sawdust. Vacuum up the sawdust to resolve this issue.
An overview of various warning symbols related to potential hazards during operation.
Identification of required safety signs indicating necessary actions or equipment.
Guidance on securely mounting the mitre saw to a workbench for stable operation.
Step-by-step guide for safely installing and removing saw blades.
How to safely turn the mitre saw on and off using the trigger and safety lock.
Using the laser guide and LED worklight for precise cutting and visibility.
Steps involved in performing various types of cuts with the mitre saw.
Procedures for adjusting and calibrating bevel and mitre angles for accuracy.
Guidance on replacing the throat plate and performing general inspections.
Steps for cleaning, lubrication, brush replacement, and storage of the tool.
Detailed exploded view of Part A components of the mitre saw.
Detailed exploded view of Part B components of the mitre saw.
To Next Page
General
