42
the operator.
• Do not change the laser light assembly. Repairs
must only be carried out by the laser manufacturer
or an authorized agent. Do not exchange with a dif-
ferent type of laser.
CAUTION: Use of controls or adjustments or perfor-
mance of procedures other than those specified herein
may result in hazardous radiation exposure.
Please refer to the relevant EN standards, EN60825-1/
A1:2002 for more information on Lasers.
7. PRODUCT FAMILIARISATION
1. Dust port
2. Left safety lock-off
3. Right safety lock-off
4. Operating handle
To Next Page
