4-14
CDD3000-HF Operation Manual
4 Commissioning
4.3.5 Setting function
parameters
Once the preset solution, its basic settings and the motor data have been
set, general function settings can also be made.
In contrast to the basic settings, the functions are independent of the
preset solution.
Example:
Setting “max. torque”
The required functions, such as the maximum torque, can be
programmed using the D
RIVEMANAGER. When you select “Limit values”:
Figure 4.6 Parameter setting in the DRIVEMANAGER:
this window opens up:
The maximum torque can be set on the “Limit values” tab.
To Next Page
Loading...