Lutron Electronics BTM-4208SD - 5-3 Manual Datalogger

b. Pause the datalogger
During execute the Datalogger function , if press the
" Logger Button " ( 3-7, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the text of " REC " will stop flashing.
Remark :
If press the " Logger Button " ( 3-7, Fig. 1 ) once again
will execute the Datalogger again, the text of " REC " will
flashing .
c. Finish the Datalogger
During pause the Datalogger, press the " REC Button "
( 3-4, Fig. 1) continuously at least two seconds, the " REC "
indicator will be disappeared and finish the Datalogger.
5-3 Manual Datalogger ( Set sampling time = 0
second )
a. Set sampling time is to 0 second
Press the " REC Button ( 3-4, Fig. 1 ) once , the LCD will
show the text " REC ", then press the " Logger Button "
( 3-7, Fig. 1 ) once, the " REC " will flashing once and
Beeper will sound once, at the same time the measuring
data along the time information and the Position no. will
be saved into the memory circuit.
11