Lutron Electronics BTM-4208SD - Set Beeper Sound ON;OFF

7-5 Set beeper sound ON/OFF
When the Display's text " bEEP " is flashing
1)Press the " Enter Button " ( 3-4, Fig. 1 ) once,
use the " Button " ( 3-5, Fig. 1 ) or " Button " ▲▼
( 3-6, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Meter's beep sound will be ON with default.
no - Meter's beep sound will be OFF with default.
2)After select the upper text to " yES " or " no ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
7-6 Select the Temp. unit to or ℃℉
When the Display text " t-CF " is flashing
1)Press the " Enter Button " ( 3-4, Fig. 1 ) once,
use the " Button " ( 3-5, Fig. 1 ) or " Button " ▲▼
( 3-6, Fig. 1 ) to select the upper Display text to " C " or
" F ".
C - Temperature unit is ℃
F - Temperature unit is ℉
2)After Display unit is selected to " C " or " F ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
20