Lutron Electronics BTM-4208SD User Manual

7-3 Decimal point of SD card setting
The numerical data structure of SD card is default used
the " . " as the decimal, for example "20.6" "1000.53" .
But in certain countries ( Europe ...) is used the " , " as
the decimal point, for example " 20,6 " "1000,53".
Under such situation, it should change the Decimal
character at first.
When the Display's text " dEC " is flashing
1)Press the " Enter Button " ( 3-4, Fig. 1 ) once,
use the " Button " ( 3-5, Fig. 1 ) or " Button " ▲▼
( 3-6, Fig. 1 ) to select the upper value to " USA " or
" Euro ".
USA - Use " . " as the Decimal point with default.
Euro - Use " , " as the Decimal point with default.
2)After select the upper text to " USA " or " Euro ",
press the " Enter Button " ( 3-4, Fig. 1 ) will save the
setting function with default.
7-4 Auto power OFF management
When the Display's text " PoFF " is flashing
1)Press the " Enter Button " ( 3-4, Fig. 1 ) once,
use the " Button " ( 3-5, Fig. 1 ) or " Button " ▲▼
( 3-6, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Auto Power Off management will enable.
no - Auto Power Off management will disable.
2)After select the upper text to " yES " or " no ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
19

Lutron Electronics BTM-4208SD Specifications

General

Brand	Lutron Electronics
Model	BTM-4208SD
Category	Data Loggers
Language	English