Set beeper sound ON/OFF
t-CF......Select the Temp. unit to or ℃℉
SP-t......Set sampling time
Sd-F..... SD memory card Format
Remark :
During execute the " Advanced Setting " function,
if press " ESC Button " ( 3-2, Fig. 1 ) once will exit
the " Advanced Setting " function, the LCD will
return to normal screen.
7-1 Set clock time ( Year/Month/Date,
Hour/Minute/ Second )
When the Display's text " dAtE " is flashing
1)Press the " Enter Button " ( 3-4, Fig. 1 ) once,
Use the " Button " ( 3-5, Fig. 1 ) or " Button " ▲▼
( 3-6, Fig. 1 ) to adjust the value ( Setting start from
Year value ). After the desired year value is set, press
the " Enter Button " ( 3-4, Fig. 1 ) once will going to
next value adjustment ( for example, first setting
value is Year then next to adjust Month, Date, Hour,
Minute, Second value ).
2)After set all the time value ( Year, Month, Date, Hour,
Minute, Second ), will jump to " Set loop time of
recorder " setting screen ( Chapter 7-2 ).
Remark :
After the time value is setting, the internal clock will
run precisely even Power is off ( The battery is under
normal condition, no low battery condition ).
16
To Next Page
Loading...
