7. MOUNTING HOLES & OPTIONAL
TEST STAND
Fruit hardness tester is a precise instrument, best results
are obtained when the gauge is fitted to a test stand.
Mounting holes ( 3-9, Fig. 1 ) are provided on the back of
the gauge for easy stand mounting.
Optional Test Stand & accessory :
*TEST STAND, Model : FS-1001
Test stand, cooperate with Force gauge, whole system
will be become the useful tool for material's tension &
compression analysis.
Size : 630 x 250 x 230 mm. Weight : 7.02 Kg ( 15.4 LB ).
10
1012-FR5120
To Previous Page
Loading...
