Lutron Electronics Sivoia QS - Mount the Shade

Page 10
Sivoia QS Drapery System Installation Guide
This procedure will un-assign this drapery drive from all wireless controls, but will not affect the open and close limits.
A. Press and hold
until
the green LED flashes.
Release.
B. Press and hold until
the green LED flashes.
Release.
C. Press and hold until
the green LED flashes.
Release.
D. Press and hold until the
LED flashes a multicolor
sequence, indicating the
factory default settings
have taken effect. Release.
O
Restoring Factory Default Settings
HOLD HOLD HOLD HOLD