Need help?Do you have a question about the Luxman MQ-88uC and is the answer not in the manual?
General| Type | Vacuum Tube Amplifier |
|---|---|
| Output Power | 25W + 25W (8Ω) |
| Frequency Response | 10Hz - 100kHz |
| Input Impedance | 100kΩ |
| Output Impedance | 4Ω / 8Ω |
| Vacuum tubes used | 6L6GC, 12AX7 |
| Tube Complement | KT88 x4, 12AX7 x2, 12AU7 x2 |
| Dimensions | 440(W) x 185(H) x 230(D) mm |
| Weight | 28kg |
Guidance on selecting a suitable location for the amplifier, emphasizing ventilation and heat radiation.
Warning about short-circuiting speaker terminals to prevent amplifier malfunction.
Information on power-on delay and advice for repair, adjustment, and cleaning procedures.
Precautions for connecting components and general safety warnings for unit handling and operation.
Details on the use of specific JJ Electronic vacuum tubes for all amplification stages.
Information on the rated output of 25W+25W suitable for various speaker environments.
Description of KT88 output tubes, parallelized first stage, and triode connection.
Details on impedance matching, classic parts layout, monocoque chassis, and transformers.
Information on LUXMAN's original block capacitor and dual input options.
Details on vacuum tube bonnet, custom parts, wide pitch RCA terminals, and reliable design.
Details on the operation indicator, operation switch, and volume control on the front panel.
Details on direct/variable inputs, input selector, speaker terminals, and AC inlet on the rear panel.
Instructions on connecting the power cable and ensuring all devices are off before making connections.
Guidance on connecting the power cable and source components like CD players or control amplifiers.
Detailed steps for connecting speakers to the unit, considering impedance and polarity.
To Next Page
