Need help?Do you have a question about the Luxman M-800A and is the answer not in the manual?
General| Total Harmonic Distortion | 0.009% (8Ω, 1 kHz) |
|---|---|
| Input Sensitivity | 1.12V |
| Signal-to-Noise Ratio | 115dB (IHF-A) |
| Type | Power Amplifier |
| Dimensions | 440 mm (W) x 193 mm (H) x 463 mm (D) |
| Weight | 38kg |
| Frequency Response | 1 Hz - 130 kHz |
Details the power status indicators (warming up, operational, stand-by) and the main power on/off button.
Explains the balanced input selector button and its blue status indicator LED.
Describes the power output meters and the function of the display mode switch for meters.
Explains the blue LED that indicates the Bridged Monaural output is engaged.
Details the AC power socket, line phase sensor, power switch, and remote trigger input.
Describes RCA inputs, balanced inputs, speaker terminals, grounding post, and stereo/mono selector.
Instructions for preparing bare wire speaker cables, including insulation stripping and twisting.
Guidance on attaching spade lugs or banana plugs to speaker cables for secure connection.
Recommendations for amplifier placement, ensuring adequate ventilation for cool operation.
Details the pin configuration for XLR balanced audio connections.
Diagram illustrating stereo connections between CD players, control amp, and speakers.
Diagram showing mono (BTL) connections for two amplifiers and speakers.
Illustrates the internal signal path, power supply, and control circuits of the amplifier.
Details rated output, sensitivity, impedance, distortion, frequency response, and dimensions.
Lists the power cable, remote turn-on/off cable, and other included items.
Outlines the 3-year limited warranty period, conditions, and exclusions for the product.
Details warranty voiding conditions, required documentation, and the rectification process.
Specific warranty terms for equipment used for demonstration purposes.
Covers implied warranties, consequential damages, and specific legal rights.
To Next Page
