Need help?Do you have a question about the Luxman sq 507 and is the answer not in the manual?
Explains fundamental connections for stereo audio systems.
Details connecting right and left speakers, phase matching, and terminal usage.
Guides on connecting the amplifier to an AC power outlet safely.
Describes connecting record players and signal flow from input to output.
Outlines basic playback steps and control functions for sound reproduction.
Explains connecting tape players and monitors for playback and recording.
Guides on recording audio to tape and monitoring playback.
Lists essential steps for achieving sound playback from tape.
Adjusts input impedance for optimal phono cartridge performance.
Describes connecting tuners, microphones, and other audio sources.
Details adjusting the input level for the AUX-1 connector.
Details DIN connector usage for tape recorders and simultaneous recording.
Identifies and explains various controls for sound adjustment and tone shaping.
Lists technical specifications for the preamplifier and main amplifier.
Provides details on connector sensitivities, impedances, and ratings.
Lists semiconductor components, dimensions, and weight.
Explains mode selection, volume, and channel balance adjustments.
Covers bass, treble, and frequency adjustments for sound shaping.
Details treble/bass cut filters and the attenuator switch for signal modification.
Shows bass level adjustments at different turnover frequencies.
Shows treble level adjustments at different turnover frequencies.
Presents output power versus total harmonic distortion data.
Explains signal flow and identifies key components in the amplifier's block diagram.
Shows the detailed electronic schematics for both audio channels.
Lists the specific components used in the circuit diagram.
To Next Page
General
