User Interface Commands
FOT Lab Kit User’s Manual 4-13
DS Display String
The DS command may be used by the OEM customer to enter a line
of text to be displayed on startup. This text will also be displayed as
part of the parameter dump (see example in description of ID
command, page 4-14).
Information Request:
Syntax: <Esc>DS ? <CRLF>
Response: DS = OEM display string
Example: DS = XYZ Corp. Model SuperPro 5000
Parameter Modification:
Syntax: <Esc>DS = OEM display string <CRLF>
Range: Display string may be from 1 to 31 characters.
.
NOTE Characters must be standard ASCII printing characters. If the first
character after the '=' sign is a Space (20h) it will be discarded.
To prevent display of this string enter an empty string i.e. press
Enter key immediately after the Equal sign ('='): <Esc>DS
=<CR>
Example Sign-On Message:
LUXTRON CORP.
Copyright 2002
M600 Fluoroptic Thermometer, Software Version 1.00
Serial # 12345
XYZ Corp. Model SuperPro 5000
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...