Luxtron FOT Lab Kit - Page 43

User Interface Commands
4-14 FOT Lab Kit User’s Manual
ID Identification Query
The ID command is used to report the device's identification string,
firmware version, device serial number and current operating
parameters. In essence this command combines the information
requests of most other system commands into an inclusive report.
The DS and SN command data are incorporated into the header
information. The SL command values, being dynamic are not
included in the report.
Information Request:
Syntax: <Esc>ID ? <CRLF>
Response: ID = info
Example:
LUXTRON CORP. Copyright 2002
M600 Fluoroptic Thermometer, Software Version 1.00
Serial # 12345
XYZ Corp. Model SuperPro 5000
PS = 1,2,3,4
SM = 8
MU = 1 S
UN = CELSIUS
DF = ABBR
AE = ENABLE
AS = 27.7778
AO = -30.00 C
CC = ENABLE|
CT = 75.00 C
MS = DISABLE
ST = ENABLE
Please refer to the descriptions of the individual commands related
to the reported parameters for details on interpreting the
information.
Parameter Modification:
n/a
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com