10
End Time Settings
X
Month: Select the ending Month for DST.
X
Date: Select the ending Date for DST.
X
Year: Select the ending Year for DST.
X
Hours: Select the ending Hour for DST.
X
Minutes: Select the ending Minute for DST.
Offset settings
Offset: Enter the number of minutes to add during Daylight Saving Time. (Range: 1 to 1440)
X Save: Click to save any unsaved changes.
X Reset: Click to cancel any unsaved changes and revert to previously-saved values. Not available once changes are saved.
Log
The Log enables you to configure the Log Server to be used by the Switch for remote storage and management
of log files.
To configure the System Log, select Configuration > Quick Setup > System > Log from the navigation menu.
System Log configuration
System Log Configuration
X
Server Mode: Allows you to Enable or Disable the Syslog Server configuration.
X
Server Address: Indicates the IPv4 Address of your Syslog Server. If the Switch has a local DNS Server configured the
Server Address can be a Host Name.
To Next Page
Loading...
Need help?
General
