20
VLAN Port Isolation
This page is used for Enabling or Disabling Port isolation on Ports in a VLAN. A Port Member of a VLAN can be isolated
to other isolated Ports on the same VLAN.
To configure VLAN Port Isolation, select Configuration > Private VLANs > Port Isolation from the navigation menu.
VLAN Port Isolation Configuration
Port Number: Allows you to place the Port in Isolation or remove the port from Isolation. When checked Port
Isolation is Enabled on the Port, when unchecked Port Isolation is Disabled on that Port. By default Port Isolation is
Disabled on all Ports.
X Refresh: Click to refresh the Port Isolation Configuration page.
X Save: Click to save any unsaved changes.
X Reset: Click to cancel any unsaved changes and revert to previously-saved values. Not available once changes are saved.
To Next Page
Loading...
Need help?
General
