29
Port: Displays the Port Number that corresponds to the MSTI Configuration Row.
Path Cost: Allows you to set the path cost of the Port. The Auto setting will set the path cost using the Physical Link
speed and the 802.1D recommended values. Using the Specific setting you can define a Value. Path Cost is used when
establishing the Active Topology of the Network. Lower Path Cost Ports are chosen as forwarding Ports while Higher
Path Cost Ports are used as backup links. Valid values range from 1-200000000.
Priority: Allows you to set the Port Priority. This is used to control the Priority of Ports with identical Port Costs. (See
Path Cost).
X Save: Click to save any unsaved changes.
X Reset: Click to cancel any unsaved changes and revert to previously-saved values. Not available once changes are saved.
To Next Page
Loading...
Need help?
General
