16
15. Do not block device’s hole for heat radiation.
16. Turn off the power immediately and take out the plug when there is smoke, spark, abnormal noise
or smell.
17. IEC standard needs to be satisfied with in order to connect an outside device with input/output signal
or other connector. (IT equipment is IEC 60950, and electric equipment for medical use is IEC
60601). Moreover, all the systems need to satisfy the safety requirement, IEC 60601-1 when it
comes to the electric system for medical use. Person who connects outside device with input/output
signal or other connector has the obligation to take responsibility in accordance to the IEC60601-1.
Contact local technician or distributor if you have doubts.
18. This equipment may cause edge which is hazardous for other devices at the periphery. Wireless
frequency may be generated or used, and energy may be released when the device is not installed
or used according to the guideline. However, there is no guarantee that edge does not result when
carrying out specific installation. If this device leads to hazardous interception on other device when
the equipment is turned on/off, user needs to solve the interception issue by using one of the
following measures.
- Change direction or relocate the receiver
- Distance between equipment is increased
- Connect the equipment with the socket of the circuit connected with other device and other
circuit
- Ask manufacturing business or field service technician for help
19. To avoid electrocution, this device must be connected to the supply power along with protective
grounding.
20. Do not place at a difficult location when separating cable when it comes to the device’s placement.
21. When you carry this product, please hold on left and right bottom of the product. If you want the
product to be installed on another place, please call A/S center.
To Next Page
Loading...
Need help?
General