18
3.Characteristics
1. It is possible to carry out both refractive power and corneal curvature measurement with one
machine.
2. It is possible to measure even the myopia since the refractive power measurement range is very
broad ranging from –30 D to +25 D.
3. When measuring refractive power, it is possible to measure up to a minimum pupil diameter Ø2.0
mm.
4. Fog and mist technique that is applied to the internal fixation Target enables increasingly accurate
measurement by ensuring natural and comforting feel for the patient’s eyes.
5. Cornea measurement’s marking form and cornea equivalence curve rate can be selected.
6. Distance between pupils (PD) measurement is enabled.
7. It is possible to observe the state of cataract patient’s eyes or scratch on the contact lens surface
through light observation with Retro-Illumination. It is possible to store up to two images of the left/right
eyes in the memory. Stored image can be output on the monitor screen again to show to the patient.
To Next Page
Loading...
Need help?
General