LVI Touch E3 - Page 13

P16MI417 - A02 - 01/16 13
|
DEFINING TEMPERATURES FOR EACH ZONE, BOTH FOR
COMFORT AND REDUCED MODE.
01. From the “Start screen”, press “Home” button.
B
02. >> Press “Current mode” button
3
. (See “Heating Device Management” section, p 18).
03. Press the “Comfort”
or “Reduced” button
04. Press “Green check” button to confirm
05. Press “+” or “–” to set the temperature
06. Press “Heating”button
1
to save the temperature
07. Press the arrows
2
to change room. Or press button
9
to see all rooms.
Repeat from >> 02.
DEFINE WEEKLY PROGRAM FOR EACH ROOM
You have the possibility to SELECTapre-denedprogram,CREATE a new program
or EDIT (make small changes) to a program you have created yourself.
TO SELECT
01. From the “Start screen”, press “Home” button.
B
02. Press the arrows
2
to change room. Or press button
9
to see all rooms.
03. Press “Current mode” button
3
. (See “Heating Device Management” section, p 18).
04. Press “Program Setting” button
m
05. Press “Select” to choose any of the stored programs. There are 5 pre-defined
programs available.
06. Press “Green check” button to select a program
07. Warning sign, press”Green check” button.
08. Press the “back” button
09. Press the “clock” button
10. Press “Green check” button.
TO CREATE
01. From the “Start screen”, press “Home” button.
B
02. Press the arrows
2
to change room. Or press button
9
to see all rooms.
03. Press “Current mode” button
3
. (See “Heating Device Management” section, p 18).
04. Press “Program Setting” button
m
05. Press “Create” to define your own program.
06. >> Select the days that you want to program in the same way. When a day is:
• Red, it is not programmed
• Grey, currently selected for programming
• Green, it is programmed
FOR THE INSTALLER
AND USERS
UK