17
Control
Call-out #
Control
Picture
Control
Name
Control Description
1
Bypass
Control
Click the Bypass Control to bypass or enable the effect.
2
Solo Control Click the Solo Control to bypass or enable other effects in the
same channel.
3
Previous
Preset
Control
Click the Previous Preset Control to load the previous preset
in the list.
4
Preset
Control
Clicking the Preset Control opens a menu that displays
a preset list for the effect. Click the desired preset to load it.
5
Next Preset
Control
Click the Next Preset Control to load the next preset in the
list.
3.3 BPM Delay
BPM Delay
is an effect that creates delayed repetitions of the incoming signal. Below is
an image of
BPM Delay
. Refer to the table below the graphic for details of each
control.
Control
Call-out #
Control
Picture
Control
Name
Control Description
1
Level
Control
The Level Control sets the balance between the processed and
unprocessed signal, where the 12 o'clock position outputs
equal amounts of processed and unprocessed signal levels.
Rotate this control clockwise to increase the amount of the
unprocessed signal, and rotate it counterclockwise to increase
the amount of the processed signal in the output of the effect.
To Next Page
Loading...
Need help?
General
