15
3 Included Effects
NRV10 interFX includes six VST effects. Two of these effects, Compressor and
Expander-Gate, are included as separate plug-ins, but are functionally identical to the
integrated Compressor and Expander-Gate.
3.1 Common Effect Controls
The following controls are common to all included NRV10 interFX effects. Below is an
image of these controls. Refer to the table below the graphic for details of each
control.
Control
Call-
out #
Control Picture Control
Name
Control Description
1 Parameter
Display
The Parameter Display reports the value of the
currently adjusted or clicked effect parameter.
2
On-Off
Button
Clicking the On-Off Button enables or disables
the effect.
3
Compare
(C) Button
The Compare Button works in conjunction with
the Preset Buttons. When you load a preset
by clicking a Preset Button, and modify the
preset by changing the controls of the effect,
clicking the Compare Button switches the
effect between the original preset and your
modified version.
4
Preset
Buttons
Clicking a Preset Button loads the currently
assigned effect preset. To assign a different
preset to a Preset Button, follow these steps:
1. Right-click the desired Preset Button.
This action opens a sub-menu.
2. Select the desired preset from the
"Built-In" or "User" sub-menus. The
"User" sub-menu appears only if you
To Next Page
Loading...
Need help?
General
