M-Audio Venom

Appendix B: System Exclusive Implementation
101
Venom User Guide
Effects and Mixer Data Dump
When an Effects Edit buffer data is recalled the following data is sent as part of the SysEx:
Parameters can also be individually updated using the appropriate address.
01 3D PatchName [1] 0 ~ 127
01 3E PatchName [2] 0 ~ 127
01 3F PatchName [3] 0 ~ 127
01 40 PatchName [4] 0 ~ 127
01 41 PatchName [5] 0 ~ 127
01 42 PatchName [6] 0 ~ 127
01 43 PatchName [7] 0 ~ 127
01 44 PatchName [8] 0 ~ 127
01 45 PatchName [9] 0 ~ 127
Addr [H] Parameter Name Range
00 00 Aux1Reverb.Mode Off/On ***
00 01 Aux1Reverb.Type 0 ~ 1
00 02 Aux1Reverb.Depth 0 ~ 127
00 03 Aux1Reverb.PreHP 0 ~ 127
00 04 Aux1Reverb.PreDelay 0 ~ 127
00 05 Aux1Reverb.HighDamp 0 ~ 127
00 06 Aux1Reverb.Time 0 ~ 127
00 07 Aux1Reverb.EchoFeedback 0 ~ 127
00 08 Aux1Reverb.GateDelayTime 0 ~ 123
00 09 Aux1Reverb.GateThresh 0 ~ 127
00 0A Aux1Reverb.ToneGain 0 ~ 127
00 0B Aux1Reverb.ToneFreq 0 ~ 127
00 0C Aux2Delay.Mode Off/On ***
00 0D Aux2Delay.Type 0 ~ 4
00 0E Aux2Delay.Depth 0 ~ 127
00 0F Aux2Delay.ToAux1 0 ~ 127
00 10 Aux2Delay.PreHP 0 ~ 127
00 11 Aux2Delay.PreLP 0 ~ 127
00 12 Aux2Delay.Time 0 ~ 127
00 13 Aux2Delay.Feedback 0 ~ 127
00 14 Aux2Delay.HighDamp 0 ~ 127
00 15 Aux2Delay.LfoRate 0 ~ 123
00 16 Aux2Delay.LfoDepth 0 ~ 127
00 17 Mixer.ProgVolume 0 ~ 127
00 18 MasterEQ.LowFreq 0 ~ 127
00 19 MasterEQ.LowGain 0 ~ 127
00 1A MasterEQ.MidFreq 0 ~ 127
00 1B MasterEQ.MidGain 0 ~ 127
00 1C MasterEQ.HighFreq 0 ~ 127
00 1D MasterEQ.HighGain 0 ~ 127