Chapter 5: Advanced Synthesizer and Effects Editing
72
Venom User Guide
Octave Determines the number of octaves (–4 to +4) in which the arpeggiator plays notes. A setting of +1
means that the arpeggiator plays the keys that are held, then plays the same notes an octave higher. Negative
settings make the arpeggiator play notes in octaves below the ones that are held. This parameter is disabled
when the Arpeggiator Mode is set to Drum.
Aux & Master Controls
The Aux and Master controls let you set the Auxiliary Effect 1, Auxiliary Effect 2, and Master controls for the
selected Multi Part.
M (Use Multi Settings) Overrides the referenced Single Program Auxiliary Effects and Master settings and uses
the Multi Part settings.
1–4 (Use Single Settings) Uses the referenced Single Program settings for Multi Part 1, 2, 3, or 4 and disables the
Multi Part settings.
AUX FX 1
The Aux FX 1 controls provide access to the Type, On/Off, Depth, Time, and Gate Time controls for Auxiliary Ef-
fect 1 (see “Aux FX 1” on page 60).
AUX FX 2
The Aux FX 2 controls provide access to the Type, On/Off, Depth, Feedback, and Aux Send controls for Auxiliary
Effect 2 (see “Aux FX 2” on page 62).
Master
The Master controls provide access to the Low Gain, Mid Frequency, Mid Gain, High Gain, and Volume controls for
Master EQ and Volume (see “Master” on page 55).
Multi Part Arpeggiator settings
To Next Page
Loading...
