59
Initial State
AUTO Swing
air flow direction adjustment
vertical air flow
Pos. 2: No initial state displayed on remote control. The vertical lou-
vers will be fixed on the current position.
CAUTIONS:
• Before adjusting the louvers manually, turn off the unit.
• When humidity is high, condensate water might occur at air outlet
if all vertical louvers are adjusted to the right.
• It is advisable not to keep horizontal flap at downward position
for a long time in COOL or DRY mode, otherwise, condensate wa-
ter might occur.
• When restarting after turning the unit OFF with the remote con-
trol, the remote will automatically return to the previous set swing
position.
Pos. 1:
To Next Page
Loading...
Need help?
General
