EasyManua.ls Logo

MAC3 HydroController HCW MT 1P - Page 62

MAC3 HydroController HCW MT 1P
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Manuale Utente HC - Copyright © 2008 MAC3. All right reserved.
Man 01
Disegno 6328
21
Via Baldanzese, 149 50041 Calenzano FI
Tel. 055 8877672 – Fax 8877068
www.mac3.it - e-mail: mac3@mac3.it
English
2. WARNINGS
Symbols list:
DANGER
DANGER, RISK OF ELECTROCUTION
WARNING
DANGER:
HCW cannot be used on pipes containing abrasive liquids, fibrous solid subs
tances or
inflammable liquids or explosives
WARNING:
HC must be installed in closed but ventilated safe environments and used with non
aggressive water which has a maximum temperature not higher than 40°C and a
temperature no lower than 4°C
WARNING:
MAC3 S.p.A. will not be held responsible for any damage caused by the improper or
prohibited use of HC
WARNING:
HC must be installed in environments that are protected from freezing and are
weather-proof
WARNING:
HC must be installed as close as possible to the electropump
WARNING:
Make certain that the electropump has been perfectly primed before attempting to
install HC
DANGER:
The hook-
up of the HC to the electric board must be carried out by qualified personnel
with respect to the existing norms – HC must be protected by a thermal switch.
DANGER:
HC must be connected to an efficient grounding system
DANGER:
Before any kind of intervention, make sure that the HC has been disconnected from
the power supply
WARNING:
It is advisable to follow the HC with a small expansion chamber (8l. Per HCW
20l.
per HCA) and a try cock
DANGER:
Don’t make operations with HydroController open.

Related product manuals