MACDEV PRIME - Know Your Prime

KNOW YOUR Prime®
2
1
3
4
5
7
8
10
6
11
9
Congratulaons on your purchase of a new MacDev Prime. The Prime paintball marker uses a highly ecient
spool valve drive for a at, constent and accurate shot. The drive is powered by a high precision, low power
solenoid valve, manufactured in house by MacDev. The enre system is controlled by a new generaon, robust
microprocessor running a proprietary operang system.
The latest features have been added around this powerful base core to bring you a marker with unrivalled
usability, quality and reliability.
Please take the me to learn the parts of your Prime, it will help you when reading this manual.
Numbered basic parts as shown in the gure on the le:
1. Shi 2 barrel
2. Feed clamp lever (used to ax your loader)
3. Drive cover (pull up and back to remove)
4. Velocity regulator adjustment (an clockwise to increase velocity)
5. Eye covers and screws
6. OLED display used to view gun status/sengs
7. Trigger with screw adjustments
8. Membrane pad with power and programming buons
9. Venng ASA, screw your air system in here
10. Venng ASA on/o lever (used to turn the air on or o)
11. Front grip assembly
Please note, the features and included accessories are subject to change, and may vary from those show in this manual.
6