SRM-Flex Portable Column PA System
4
SRM-Flex Portable Column PA System
Getting Started
Introduction
The Mackie SRM-Flex Portable Column PA System features
a compact, lightweight form factor, signature SRM Series
sound quality, and intuitive Mackie mixer design for maximum
flexibility.
With a staggering 300W of power, custom 6-driver
wide-dispersion array, and 0" subwoofer, SRM-Flex has
plenty of headroom to ensure crystal-clear, room-filling
sound.
The built-in 6-channel digital mixer makes it easy to dial
in your optimal sound in minutes with full control over levels,
EQ, reverb, and more via physical knobs or wirelessly on your
phone. You can even stream music or backing tracks via any
Bluetooth® enabled device.
Perfect for solo acts, bands, corporate events, schools,
and more.
How to Use This Manual:
Afer this introduction, a getting started guide will help
you get things set up fast. The hookup diagrams show some
typical SRM-Flex setups.
This icon marks information that is critically
important or unique! For your own good, read and
remember them...it is a good idea to pay special
attention to these areas in the Owner’s Manual
marked with the “VERY IMPORTANT” hand icon.
There’s an illustration of a microscope,
so, of course, you’re going to get more
detailed information when you see this little
guy. There are explanations of features
and practical tips listed here.
It’s a good idea to pay attention to text displayed
next to a note icon, as this icon draws attention
to certain features and functions relating to the
usage of the SRM-Flex.
The following steps will help you set up the SRM-Flex quickly.
. Make all initial connections with the power switch OFF.
2. Connect height extension module(s) and/or HF driver
column to the base station. [Instructions discussed in
greater detail on page 9.]
3. Plug signal sources into SRM-Flex, such as:
• Microphones plugged into the mic inputs.
• Instrument level sources, such as acoustic guitars
w/active pickups into the instrument inputs
• Line-level sources such as keyboards,
drum machines, or MP3 players plugged
into the line-level inputs.
• Smartphone paired and connected via Bluetooth.
4. Push the line cord securely into the IEC connector
and plug the other end into a grounded AC outlet.
5. Turn SRM-Flex on.
6. Be sure that the volume of the input is the same as it would
be during normal use.
7. Slowly bring up the main output level to a comfortable
listening level.
Things to Remember:
• Never listen to loud music for prolonged periods. Please see
the Safety Instructions on page 2 for information on hearing
protection.
• Save the shipping boxes and packing materials! You may
need them someday. Besides, the cats will love playing
in them and jumping out at you unexpectedly. Remember
to pretend like you are surprised!
• Save your sales receipt in a safe place.
Please write the serial numbers here for future reference
(i.e., insurance claims, tech support, return authorization,
make dad proud, etc.)
Purchased at:
Date of purchase:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
