MACROMEDIA FLASH 8-FLASH LITE 1.X ACTIONSCRIPT LANGUAGE - Page 123

fscommand() 123
Launch
Availability
Flash Lite 1.1.
Usage
status = fscommand("Launch", "application-path, arg1, arg2,..., argn")
Parameters
"Launch" The command specifier. In Flash Lite, you use the fscommand() function only to
execute the
Launch command.
"application-path, arg1, arg2,..., argn" The name of the application being started
and the parameters to it, separated by commas.
Description
Command executed through the fscommand() function; launches another application on the
device. The name of the application being launched and the parameters to it are passed in as a
single argument.
This command is supported only when the Flash Lite player is running in stand-alone mode.
It is not supported when the player is running in the context of another application (for
example, as a plug-in to a browser).
Example
The following example would open wap.yahoo.com on the services/Web browser on Series 60
phones:
on(keyPress "9") {
status = fscommand("launch",
"z:\\system\\apps\\browser\\browser.app,http://wap.yahoo.com");
}
See also
fscommand2()
NOTE
This feature is operating-system dependent.