Magellan Blazer12 - Leg Editing in Routes; Editing Leg Start and End Points

23
Editing a Leg in a Route
Press
MENU
until ROUTE appears at the top of the display.
Press
ENTER
. Use the LEFT/RIGHT ARROWs until the leg
you wish to edit is displayed. Press the UP ARROW until
PRESS ENT TO EDIT is displayed and press
ENTER
.
The Edit Leg screen is displayed with the FROM landmark
flashing. Use the LEFT/RIGHT ARROWs to select a new
FROM landmark and press
ENTER
.
The TO landmark begins flashing alerting
you that the GPS Blazer12 is ready for you
to select a new TO landmark. Press
ENTER
to accept the TO landmark as it is
or use the LEFT/RIGHT ARROWs to
select a new TO landmark and press
ENTER
.
The leg before and after the one you just edited will be
automatically changed to reflect the changes that were made
to this leg.