Magellan eXplorist Settings
Magellan eXplorist 110 User Manual 21
Diagnostics
Running the Audio Test
1. Access the Settings Menu.
2. Select Diagnostics.
3. Select the Audio Test button.
Running the Video Test
1. Access the Settings Menu.
2. Select Diagnostics.
3. Select the Video Test button.
Running the Keypad Test
1. Access the Settings Menu.
2. Select Diagnostics.
3. Select the Keypad Test button.
Language
Selecting Language
1. Access the Settings Menu.
2. Select Language.
3. Select desired language to use.
4. Conrm changing the language.
Product Information
Viewing the Receiver Serial Number
1. Access the Settings Menu.
2. Select Product Info.
3. The serial number for the receiver is displayed
at the top of the screen.
Viewing the SW Version, EULA or Copyright
Information
1. Access the Settings Menu.
2. Select the Product Info button.
3. Select Versions, EULA or Copyright Info.
2. Select the Navigation button.
3. Select the Coordinate Datum drop-down menu
and select the desired datum.
Selecting North Reference
1. Access the Settings Menu.
2. Select the Navigation button.
3. Select the North Reference drop-down menu
and select the north reference.
Setting Altimeter Source
1. Access the Settings Menu.
2. Select the Navigation button.
3. Select the Altimeter drop-down menu and
select the desired source.
Memory
This setting is used to view memory usage and
provides access to memory tools.
Clear Memory from Device
1. Access the Settings Menu.
2. Select Memory.
3. Select the Clear Memory from Device button
4. Conrm that you want to clear the devices
waypoint, geocache, route memory.
Restoring Factory Defaults
1. Access the Settings Menu.
2. Select Memory.
3. Select the Restore Factory Default button.
4. Conrm that you want to restore the factory
defaults.
Connectivity
Setting Receiver Connectivity
1. Access the Settings Menu.
2. Select Connectivity.
3. Select the Mode drop-down menu and select
the desired connectivity mode.
To Previous Page
Loading...
Need help?
General
Weight and Dimensions
