27
www.magellangps.com
Setting ARRIVAL Alert
The ARRIVAL alert can be turned on or off. When on, the alert will beep when you have
arrived at the trip destination or at the end of one of the legs in the trip.
1. From the SETTINGS menu, highlight ALERTS and press ENTER.
2. Highlight ARRIVAL and press ENTER.
3. Highlight ON or OFF and press ENTER.
Setting ARRIVAL DISTANCE Alert
The ARRIVAL DISTANCE alert will beep when you have crossed a point that is a set distance
from your destination.
1. From the SETTINGS menu, highlight ALERTS and press ENTER.
2. Highlight ARRIVAL DISTANCE and press ENTER.
3. Highlight the desired distance and press ENTER.
Setting WAYPOINT PROXIMITY Alert
The WAYPOINT PROXIMITY alert will beep when you are a predefined distance from a saved
waypoint.
1. From the SETTINGS menu, highlight ALERTS and press ENTER.
2. Highlight WAYPOINT PROXIMITY and press ENTER.
3. Highlight the desired distance and press ENTER.
Setting GPS FIX Alert
The GPS FIX alert can be turned on or off. When on, the alert will beep when you have lost or
reacquired the GPS signal.
1. From the SETTINGS menu, highlight ALERTS and press ENTER.
2. Highlight GPS FIX and press ENTER.
3. Highlight ON or OFF and press ENTER.
SATELLITES
SATELLITES isn’t a setting as there are no values that can be changed. Instead it is used to display the
accuracy and how good the satellite coverage is for your current location.
Viewing Satellite Information
1. From the SETTINGS menu, highlight ALERTS and press ENTER.
2. Highlight SATELLITES and press ENTER.
To Next Page
Loading...
Need help?
General