Starting Up
9
Enter the Date. Use the arrow joystick to set the date displayed to the
current date.
Arrow Joystick Up: Increases the highlighted number
Arrow Joystick Down: Decreases the highlighted number
Arrow Joystick Right: Moves the highlight one character to the right
Arrow Joystick Left: Moves the highlight one character to the left
When the month is highlighted, use the arrow joystick up or down to scroll
through the list of months.
When you have entered the correct date, press ENTER.
Accept Information. The Done button is highlighted at the bottom of the
display. Review the information you entered and if correct press ENTER.
Tip: If the time or the date is incorrect, you can fix them now. Use the
arrow joystick to highlight the time or date field that you want to fix. With
the field highlighted, press ENTER. You can now change the information
using the same technique used before.
The Satellite Status screen is displayed again and the eXplorist will try to
compute your position using the information you just provided.
Tip: If you notice that the satellite signal strength bars are still not
changing, try moving to a new location where you have a clearer view of the
sky.
As before, when the eXplorist computes the initial position, the Map screen
will be displayed with your computed position indicated by the arrow cursor
in the middle of the display.
To Next Page
Loading...
Need help?
General