Preferences
78
The eXplorist can be set to display information from any one of ten different langauges. You can select from
English, Français (French), Deutsch (German), Nederlands (Dutch), Suomi (Finnish), Español (Spanish),
Italiano (Italian), Português (Portuguese), Svenska (Swedish) and Norsk (Norwegian).
Selecting the Language for Your eXplorist
1. Press MENU.
2. Use the Arrow joystick to highlight Preferences.
3. Press ENTER.
4. Use the Arrow joystick to highlight Language.
5. Press ENTER.
6. Use the Arrow joystick to selecte the language desired.
7. Press ENTER.
The Clear Memory function of Preferences gives you a tool that you can use to globally clear:
• active track history [Track History]
• all user-entered POI’s and routes [POIs/Routes]
• all multi-leg routes [Routes]
• all track history, user-entered POIs, and routes [All]. This resets the eXplorist to its original factory
settings. It will erase all user-created files and folders from the internal memory. User-created files on
the SD card will not be deleted.
Using Clear Memory, you can also set all of the defaults in the eXplorist to the factory defaults.
1. Press MENU.
2. Use the Arrow joystick to highlight Preferences.
3. Press ENTER.
4. Use the Arrow joystick to highlight Clear Memory.
5. Press ENTER.
6. Use the Arrow joystick to highlight Track History.
7. Confirm. Use the Arrow joystick to highlight Yes to confirm or No to
cancel.
8. Press ENTER.
Selecting Languages
Clearing Memory
Clearing Track History
To Next Page
Loading...
Need help?
General