Track Logs
49
Before you can start a new active track log, you need to stop the one that is presently recording.
1. Press MENU.
2. Use the Arrow joystick to highlight Track Log.
3. Press ENTER.
4. Use the Arrow joystick to highlight Active Track.
5. Press ENTER.
6. Highlight Stop Logging. (If Resume Logging is displayed, the Track Log has already been stopped.
Go to step 10.)
7. Press ENTER.
8. Use the Arrow joystick to highlight Active Track.
9. Press ENTER.
10. Highlight New Track.
11. Press ENTER
This will save your active track log with a name you enter that you can use at some time in the future. This
does not erase your presently active route; only saves the current active track and adds it to the list of available
track logs.
1. Press MENU.
2. Use the Arrow joystick to highlight Track Log.
3. Press ENTER.
4. Use the Arrow joystick to highlight Active Track.
5. Press ENTER.
6. Highlight Save.
7. Press ENTER.
If there are not enough track points to save, an alert will be displayed, informing you of the same and
canceling the save.
8. Select the folder where you want the track log saved.
9. Press ENTER.
10. Use the Arrow joystick and ENTER button to assign a name for the track log.
11. Use the Arrow joystick to highlight OK when the name has been entered.
12. Press ENTER.
Starting a New Active Track Log
Saving an Active Track Log
To Next Page
Loading...
Need help?
General