6
Getting Started
First Time Use
Choose a location
Follow the Safety guidelines, and find a
location with a clear view of the sky.
Clean the surface
Clean the area on the windshield where the
device will be mounted. Allow the surface to
dry.
Install the car cradle
Hold the cradle firmly against the window
surface and push lever towards the base. Snap
the device on to the cradle.
Connect power
The device has an internal, rechargeable
battery that charges whenever it is connected
to vehicle power or a compatible wall charger.
Your device may not be fully charged when you
purchase it.
Power On/Off
Press and hold the Power button to turn
the device on. To turn off the device, press
the power button again. The device will
automatically power down after 15 seconds.
Note: Actual product may differ
from illustration shown.
To Next Page
Loading...
