Magellan Trailblazer User Manual

1.
From the SETUP menu, highlight "MAP DATUM" and press
ENTER.
2.
The first four datums are displayed. Press the
DOWN ARROW
to scroll through the 12 datums until the desired one is
highlighted.
3. Press
ENTER
to return to the SETUP menu.
Elevation Mode.
This setting determines whether the receiver will compute
position only or position and elevation. The 2D mode is recommended for
use at sea, where 2D will provide the best accuracy and often the best
performance. The 3D mode is recommended for land use. Automatic (AUTO)
switches between 3D and 2D, depending an the number of visible satellites.
(Default is 2D.)
Position accuracy in 2D Operation is affected by the accuracy of the elevation
entered during initialization. An accurate elevation will produce more
accurate position fixes.
1.
From the SETUP menu, highlight "ELEV. MODE" and press
ENTER.
2.
Press the
UP/DOWN ARROW
to select the desired operating
mode.
3. Press
ENTER to return to the SETUP menu.
4. Press the
UP ARROW
to access INITIALIZE. Key in the current
elevation, then press
ENTER
to return to the SETUP menu.
Distance Units.
The receiver can display distance and Speed measurements
as nautical miles (NM) and knots, statute miles (ST. MILES) and miles per hour,
or kilometers (KM) and kilometers per hour. (Default is statute miles and miles
per hour.)
1.
From the SETUP menu, highlight "DIST. UNITS" and press
ENTER.
2.
Press the UP/DOWN ARROW
to toggle between NM/KNOTS,
ST.MILES/MPH, and KM/KPH.
3.
Press ENTER
to return to the SETUP menu.
Elevation Units.
Elevation can be displayed as feet or meters. (Default is
feet.)
1.
From the SETUP menu, highlight "ELEV. UNITS" and press
ENTER.
2. Press the
UP/DOWN ARROW
to select meters or feet.
3. Press
ENTER
to return to the SETUP menu.
16

Magellan Trailblazer Specifications

General

Brand	Magellan
Model	Trailblazer
Category	GPS
Language	English