WAYPOINTS
Waypoints are accessed with the POS/WPT key.
1.
Press
POS/WPT,
followed by
CLEAR.
The receiver displays
"DEFINE WAYPOINT" and the cursor is active an the first line.
2.
Press the
RIGHT/LEFT ARROWS
to see how the cursor moves.
Press the
UP ARROW
to scroll through the characters (letters
and numbers) in order. Press the
DOWN ARROW
to scroll
through in reverse order. Notice that when you hold either
arrow down the display character jumps by three (for example,
from A to D to G). Press the center key
(0)
to insert a blank
space. (A blank is available only when entering waypoint
names. lt cannot be used when entering coordinates). You will
use these arrows to enter data, such as the initial position and
waypoints.
3.
Key in "SEATTL" as we will be entering coordinates for Seattle,
Washington. Press
ENTER
to move to the next line.
4.
Enter the coordinates for latitude. The latitude for Seattle is
47°27.00 N. Key in 47 27. If necessary, move the cursor to the
hemisphere space and press the
UP/DOWN ARROW
to select
N. (The receiver will automatically fill any blank entry fields at
the end of a coordinate with zeros. ) Press
ENTER
to move to
the next line.
23
To Next Page
Loading...
Need help?
General