SEALED BURNER COOKTOP
SEALED BURNER IDENTIFICATION
A. Removableblack porcelainizedcastiron burner capwith Ioca-
_--- -'_ tor pin.
__ To replace the burner cap: InserttheIocatorpin intothe slotin
the burnerbase (F). The burnerwillnotoperatecorrectlyif the
cap is not replacedproperly.
OR
_C B LOCAT B. Removable blackporcelainizedsteel trim ring.
C. NON-removable aluminumburnerbase.
D. Ignitor.
E. Gas tube opening.
F. Locatorslotfor Iocatorpinin blackremovableburnercap (A).
GAS TUBING IGNITORS
CAUTION: For properflowof gas and During cleaning, we recommendlear-
ignitionof theburner, DO NOT ALLOW ingtheburnercap inplacetoprotectthe
SPILLS, FOOD, CLEANING AGENTS metal ignitor electrode from possible
OR ANY OTHER MATERIAL TO EN- damage.
TER THE GASTUBE OPENING (E). If
theopeningortheorifice,locatedinside Onceburnerlights,turnknobto the de-
the opening, becomes soiled or siredsetting.The sparkingwillnotstop
clothCl°gged'tocleanUSetheacottOnarea,swab or a soft sition.Untiltheknobisturned from the LITE pc- _"_'_,--BURNEB CAP
Gas must flow freely through the small
hole in the orifice for the burner to light CAUTION: Do not touch the burner _((0_" _TBIM RING
properly. This area must be free of any when the ignitor is on and a sparking _._
soil and be kept protected from sound can be heard. "_'_ GASTUBEOPENING
boilovers or spillovers. Never remove "_"_("C=_(_,,.=_Ip, NITOR
cap except to clean. When cleaning the cooktop area or \_/
aroundthe burner base,use caretopre-
After cleaning the gas tube opening, re- vent damage to the ignitor. Ifa cleaning
place the trim ring and burner cap. Turn cloth shouldcatch the metalignitor elec-
theburnerontobesureitwilllight, lfthe trode, it could damage or break the
burnerdoes notlight aftercleaning, con- metalelectrode. If the electrode is dam-
tact an authorized servicer.Do notserv- aged or broken, the surface burner will
ice the sealed burner yourself, not light.
_8 m