4 USING THE COOKTOP
The surface burners will feature either matchlit ignition or To light surface burner with Piezo ignition:
Piezo pilotlessignition.Besure allcontrol knobs are inthe 1. Place a pan onthe burnergrate.
OFF positionbeforesupplyinggastotheappliance.Besure
gas supplytoapplianceison before I ghtingburner 2. Pushinandturnthesurfaceburner
controlknobtothe LITEposition.
IMPORTANT: Only light one sur-
Ifthe appliancehas notbeenoperatedfora periodof time, face burnerat a time.
thesurfaceburnermaybedifficulttolightduetoairinthegas
line.Tobleedoffairfromtheline,holda lightedmatchnextto 3. Immediately,rotatethe TopBurner
the burnerand turnthe surfaceburnercontrolknobto the Ignitorknobtothe right(clockwise)
ON position.When the burnerlights,turnthe knobbackto severalclicksuntiltheburnerlights.
the OFF positionand proceedasdirectedbelow. The burner should light within 6
clicks or one full rotation of the
Topreventdamagetothecooktoporpan,neveroperatethe knob.
surfaceburnerwithouta panin place,neverallowa panto .
boildry,and never operatea surface burner on HIGH for 4. When the burner lights, adjust the surface burner
extended periods of time. control knob betweenOFF and HI to select the desired
flamesize.
CAUTION: If the burnerdoes not lightwithinabout 4 5. Aftercooking,turnthe surfaceburner controlknobtothe
secondsor iftheflameshouldgooutduringcooking,turn OFF position.
the burneroff.If gas hasaccumulatedand a stronggas
odorisdetected,opena windowand wait5 minutesfor To operate burner if the Piezo ignitor is not functional:
the gas odortodisappearbeforerelightingthe burner. 1. Be sureall controlsare inthe OFF position.
To light surface burner with matchlit ignition: 2. Holda lightedmatchtothedesiredsurfaceburnerhead.
1. Placea panon the burnergrate. CAUTION: Do notturnthecontrolknobonandallowgas
2. Hold a lightedmatch nexttothe desiredsurfaceburner to escape before ghtng the match.
head. 3. Push in and turnthe surfaceburner controlknobto the
LITE position.
CAUTION: Do notturnthe controlknobon andallowgas
toescapebeforelightingthe match. 4. Whentheburnerlights,adjusttheknobbetween OFF and
HI to selectthe desiredflamesize.
3. Push in and turn the surface _ 5. After cooking,turn the knob to the OFF position.
burner control knob to the LITE
position.
4. When the burner lights, adjust
the knob between OFF and HI to When the recreational vehicle is not inuse orwhile traveling,
select the desired flame size. turn all knobs to the OFF position and turn off the main gas
supply.
5. After cooking,turn the surface burner control knobto the
OFF position.
To Next Page
Loading...
Need help?
General
