12
Figure 6
Figure 7
HOW TO LIGHT THE SURFACE BURNERS
1. Push in and turn the control knob counterclockwise
to the light position ( ). All surface burners will click
but only the burner with control knob turned to
LITE will produce a flame.
2. After the burner ignites, turn the control knob to
the desired flame size.
NOTE: ALWAYS position cooking cookware on the
burner grate before lighting the burner.
CAUTION: The flame SHOULD NOT extend beyond the
sides or the pot or pan.
IN CASE OF POWER FAILURE
WARNING: Use extreme caution when lighting burners this way.
1. Hold a lit match to the desired burner head.
2. Push and turn the control knob to the “ ” position.
3. Once burner ignites, adjust flame to the desired size.
MIN
MAX
OFF
To Next Page
Loading...
Need help?
General
