15
CLOCK & TIMER
Set Time of Day
1. When the range is first connected with power, the
display will blink “12:00”.
2. To set the correct time, press the “ ” Function
button until the indicator for the Clock blinks, and
use the “ ” or “ ” button until the correct time is
displayed. After 5 seconds, the displayed time will be
set, or you can press the “ ” button to set.
Setting the Timer
NOTE: The digital
countdown timer can be set up to the
maximum of 23 hours and 59 mins.
Figure 13
Function
Button
Decrease
Button
Increase
Button
Timer
Set
Cook
Time
End
Time
Set
Clock
�
�
�
1.
�
“
Press the “ ” button until the “ ” symbol above "Cook Time" is blinking.
2. Use the “
” or “
” button to set the amount of time to delay the start of the cooking, up to 10 hours.
3. Set the oven Temperature and Cooking Program using the knobs.
NOTE: The timer cannot control the oven's temperature and operation so the Cook Time and End time
functions cannot be used with the timer.
Delayed Cooking Start
NOTE: The oven will not operate when a delayed cook time is set until the delay time is over. To use
the oven before the delayed time is reached, the Delay function must be canceled by setting cook time to '0'.
CAUTION: The Delayed cooking should be used with caution when used with foods that easily spoil, and
should only be used for frozen or cured meats or fruits and vegetables that do not quickly spoil.
NOTE: Be sure to set the delayed start time BEFORE setting oven temperature and function.
1. Press the " " button until the " " symbol above "End Time" is blinking.
2. Use the " " and " " buttons to set the desired amount of time to delay the end of the cooking.
3. When the end of the timed program is reached, the range will beep. At this time turn the knobs to the
Off positions, then press the " " button to turn off the beeping.
�
�
Delayed Cooking End
1.
�
Press the " " button until the " " symbol above
"Timer Set" is displayed.
Use the " " or " " button to set the timer.
The time will automatically be set if no button is
pressed for 5 seconds.
When the set time is reached, the indicator
disappears and the unit will beep.
2.
3.
4.
To Next Page
Loading...
Need help?
General
