16
- The car alarm system is designed for fitting into all kinds of cars with petrol and diesel engines with +12V volatge finished
by a negative pole.
- Car alarm must be fitted following manufacturer‘s recommendation.
- The alarm installation to be carried out only by authorised service centre.
- Consult the choice of the service sentre with a manufacturer.
- International approval marks and/or international certificates of conformity are attached onto the cover of system main
parts as well as onto the box.
- Warning: Any alternations or additions to the system will automatically invalidate the installation certificate.
INSTALLATION CERTIFICATE
I, the undersigned, as a professional installer, hereby certify that the installation of the vehicle alarm system described
below has been carried out by myself pursuant to the mounting instructions supplied by the manufacturer of the system.
Description of the vehicle:
Make:
Type:
Serial number:
Registration number:
Description of the vehicle alarm system/immobilizer
1
/:
Make:
Type:
Approval number:
Issued by:
Installer's full address and stamp:
Signature: (please specify position)
1/ Cross out if does not apply.
To Previous Page
Loading...
