Do you have a question about the MAGINON WLR-310 and is the answer not in the manual?
These operating instructions provide important information about the start-up and handling of the Wi-Fi repeater.
Details the symbols and signal words used in the manual, including DANGER, WARNING, CAUTION, and NOTE.
Specifies that the Wi-Fi repeater is designed for private use as a Wi-Fi repeater only and not for commercial use.
Provides safety warnings regarding electrical installations, mains voltage, and accessible sockets for the Wi-Fi repeater.
Details hazards for children and persons with reduced abilities, outlining age limits and supervision requirements for safe use.
Warns that incorrect use of the Wi-Fi repeater can lead to damage to the device.
Instructions on how to carefully open packaging, check for damage, and verify that the delivery is complete.
Provides instructions for basic cleaning of the Wi-Fi repeater before first use, emphasizing careful handling to avoid damage.
Guides users through installing the 'Maginon WiFi repeater' app and initiating the setup process on a smartphone.
Explains the repeater's function and the necessary step to reset device defaults before configuration.
Provides step-by-step instructions for configuring the device to function as a Wi-Fi repeater.
Explains how to use the Wi-Fi Protected Setup (WPS) button for quick configuration and connection.
Provides instructions to configure the repeater to function as an Access Point, following initial setup steps.
Describes how to connect a computer to the repeater after setup and how to manually establish a Wi-Fi connection.
Details how to use the computer's WPS button in conjunction with the repeater's WPS button for wireless connection setup.
Explains how to connect a computer to the Wi-Fi repeater using a network cable and verify the connection.
Explains how to access and configure basic settings via the web interface, including default user name and password.
Guides users on configuring Wi-Fi security settings like encryption type, SSID, and network key for optimal network protection.
Details how to change the default administrator password for enhanced security of the Wi-Fi repeater.
Explains how to install new firmware for the Wi-Fi repeater using the settings menu, including important precautions.
Describes how to save current settings to a file for backup or load previous configurations, including resetting to defaults.
Provides guidance on disconnecting the device from power and storing it in a clean, dry place out of reach of children.
Warns about the burn hazard due to the device becoming hot during operation and advises to let it cool down before cleaning.
Highlights risks of short circuits from water ingress and damage from incorrect operation during cleaning procedures.
Lists detailed technical specifications including model, connection, data rate, wireless standard, operating modes, encoding, aerial, power supply, temperature, and LED display.
Provides information on the EC Declaration of Conformity, CE marking, and relevant European Directives.
Instructs users to separate packaging materials for proper disposal, recycling cardboard and paper, and recycling foil.
Advises on the legal obligation to dispose of used devices separately from domestic waste, following EU guidelines.
Provides information on software components licensed as free or open source, including copyright notes and license texts.
Outlines the 36-month warranty period, terms for repair, replacement, or refund, and consumer rights under Australian law.
Informs users about potential data loss during repair and the possibility of receiving refurbished goods as replacement.