Set-up
44
From the Settings menu select “Management” and then “Password”.
Enter your User name and the new password twice and click on
“Apply”.
Updating the firmware
Any new firmware available for the Wi-Fi repeater can be installed
using the Settings menu. Select “Management” and “Upgrade
Firmware”. Click on “Browse...” and select the Firmware file from the
hard disk. Click on “Upload” to start the installation. This operation
may take several minutes.
− Do not interrupt installation of firmware!
− Do not close Browser during installation and do not
disconnect connection to computer or even to the
power supply.
To Next Page
Loading...