Set-up
35
IP address: 192.168.10.x (with x in range 2-254)
Subnet mask: 255.255.255.0
Standard gateway: 192.168.10.1
Set up using the WPS key
If your router contains a “Push Button Configuration“ (PBC/WPS) it
is possible to carry out a quick configuration for new devices in the
network and to also connect the Wi-Fi repeater to the Wi-Fi.
1. Plug Wi-Fi repeater into a mains socket.
2. Switch on repeater by connecting to mains. The Power LED is
illuminated.
3. Press PBC/WPS key on router. (Further information for activating
the router can also be found in the Operating Instructions of
your router).
To Next Page
Loading...