Set-up
34
7. All existing wireless networks are detected and listed. Select the
network to be connected to the Wi-Fi repeater, by clicking on the
wireless network.
8. Now enter the WiFi key (Security key) for the network. Leave
other parameters unchanged. Click on “Apply”. The name of the
network (SSID) and the network key must correspond to the
information saved in the Wi-Fi router.
Once set up as a Wi-Fi repeater, the device can no longer
be accessed on the computer via http://192.168.10.1 as it
is now part of the router network.
If the computer does not automatically connect to the Wi-Fi repeater,
the network must be manually set up by entering the following
(open the network settings of your computer):
To Next Page
Loading...