Set-up
36
4. Hold down the WPS button on the Wi-Fi repeater for 7 to 10
seconds.
5. The connection is set up after a few seconds.
Installation as Access Point
Installation of Wi-Fi repeater as Access Point.
1. Follow points 1 to 5 of section Installation as Wi-Fi repeater,
open configuration program of Wi-Fi repeater.
2. At the top of the main menu click on “AP”.
3. First enter data for Access Point:
• SSID: Enter a name for your Wi-Fi.
• Channel: Select channel number. Select «Auto» in this case.
• Security Type: Enter encryption type and a key.
To Next Page
Loading...